Published Specifications
This is the full set of specification figures JoyLink publishes: all 23 product lines across 5 categories, with every field taken directly from the product catalog rather than restated. Where a figure is absent it is absent on purpose, and the reason is given at the bottom of this page.
JoyLink manufactures every line listed here in-house. The tests run on finished goods, and the certifications JoyLink does not hold, are stated on the quality page. To turn any of these figures into a price, see how to request a quotation.
| Materials | High-carbon steel wire (65Mn); Low-carbon steel wire (Q195/Q235) |
| Wire diameter (mm) | Core 2.0–3.5; barb 1.0–2.5 |
| Surface treatments | Electro-galvanized; Hot-dip galvanized; PVC coated; Stainless steel |
| Barb spacing (mm) | 50–150 |
| Materials | Low-carbon steel wire; Galvanized wire; Stainless steel wire |
| Wire diameter (mm) | 0.5–5.00 (18#–7#, catalog also lists gauges down to 0.5mm) |
| Mesh size (mm) | 25–100 (1″–4″) |
| Surface treatments | Hot-dip galvanized; Electro-galvanized; PVC coated (green/black/white) |
| Roll length (m) | 0.5–100+ |
| Roll width (m) | 0.5–5.0 |
| Height (m) | 1–6 |
| Structure | Chain-link woven mesh, on-site assembly |
| Materials | Low-carbon steel wire; Stainless steel wire; Zinc-aluminum alloy |
| Surface treatments | Galvanized |
| Materials | Low-carbon steel wire; Galvanized wire |
| Wire diameter (mm) | 6/5/6 to 8/6/8 (double-horizontal, single-vertical construction) |
| Mesh size (mm) | 50×200 |
| Surface treatments | Hot-dip galvanized; Powder coated; PVC coated |
| Panel width (mm) | 2500 (some heights also 3000) |
| Post types | Square (40×40 to 80×80mm, wall 1.5–2.0mm) or round post |
| Materials | Galvanized steel sheet; Stainless steel sheet |
| Surface treatments | Hot-dip galvanized; Electro-galvanized; Stainless steel PVC coated |
| Coil types | Concertina (coiled drum); Flat wrap; Cross-pattern |
| Blade thickness (mm) | 0.5 ± 0.05 |
| Installation | Bracket-mounted, cross-pattern, or laid flat as mesh |
| Materials | Low-carbon or stainless steel wire (welded mesh panel); Steel pipe posts |
| Wire diameter (mm) | 4–6 mm |
| Mesh size (mm) | 55×100, 50×200, 55×200 |
| Surface treatments | Hot-dip galvanized; Galvanized + powder coated; Galvanized + PVC coated |
| Colors | RAL 6005 green; RAL 7016 gray; Custom RAL on request |
| Panel width (m) | 2, 2.5, 3 |
| Post types | Round 48/60mm; Square 50/60/80mm; Rectangular 40×60 to 80×100mm, wall 1.5–2.0mm |
| Post accessories | Square post with rain cap and mounting accessories |
| Materials | Low-carbon steel wire (welded mesh panel) |
| Surface treatments | Hot-dip galvanized; Electrostatic powder coating |
| Panel height (m) | 2.0–5.2 |
| Top configuration | Can be fitted with a razor wire coil or barbed wire for extra deterrence |
| Materials | Low-carbon steel wire; Stainless steel wire; Galvanized wire |
| Wire diameter (mm) | 0.3–6.0 mm (up to 4.0mm for rolls; panels available up to 6.0mm) |
| Mesh size (mm) | 1/4″–4″ for rolls (approx. 6–100mm); panels available up to 200×200mm |
| Surface treatments | Hot-dip galvanized; Electro-galvanized; PVC coated; Stainless steel (natural finish, untreated) |
| Roll width (m) | 0.5–2.5 |
| Roll length (m) | 5–50 |
| Zinc coating | Hot-dip galvanized 40–300 g/m²; electro-galvanized (thinner, more economical) |
| Panel size (m) | 1×2, 1.2×2.4 and other sizes, customizable |
| Materials | C-glass / E-glass fiber yarn, alkali-resistant coated |
| Mesh size (mm) | 3×3, 4×4, 5×5, 10×10 |
| Surface treatments | Alkali-resistant coating |
| Colors | White; Orange; Blue; Green; Yellow; Custom colors available |
| Weight (g/m²) | 45–300 |
| Width (cm) | 5–200 |
| Length (m) | 30–200 |
| Materials | Low-carbon steel wire; Stainless steel (304/316/316L); Galvanized wire; Brass or copper wire |
| Wire diameter (mm) | 0.8–12.7 (tolerance ±0.03mm) |
| Mesh size (mm) | 2–100 (tolerance ±3%) |
| Weave types | Full weave (whole loom); Sectional weave |
| Surface treatments | Galvanized; Bare stainless; Brass/copper decorative |
| Width (m) | 0.5–2 |
| Materials | Stainless steel; Iron wire; Copper; Aluminum alloy |
| Wire diameter (mm) | 0.5–2 (common 1) |
| Surface treatments | Painting (silver, brass, yellow, ultra black, red, purple, bronze, pearl gray) |
| Sub-types | Metal mesh curtain; Chain link curtain; Ring mesh curtain; Scale mesh / coil drape |
| Aperture (mm) | 3–20 |
| Open area (%) | 40–85 |
| Weight (kg/m²) | 1.2–6 |
| Materials | Low-carbon steel wire; Galvanized steel wire; PVC-coated steel wire; Stainless steel wire |
| Wire diameter (mm) | 0.5–4.0 |
| Mesh size (mm) | 10–100 |
| Surface treatments | Electro/hot-dip galvanized; PVC coated |
| Roll width (m) | 0.5–4 |
| Gabion mesh size (mm) | 60×80 to 100×120 (larger-format gabion-grade hex mesh) |
| Edge finish | Left-hand or right-hand twisted selvedge edge |
| Materials | Low-carbon steel; Galvanized steel; Stainless steel; Aluminum |
| Mesh size (mm) | 10×25 to 200×400 mm |
| Surface treatments | Hot-dip galvanized; Electro-galvanized; Powder coated; Anodized (aluminum) |
| Thickness (mm) | 0.5–8.0 |
| Strand width (mm) | 5–50 |
| Materials | Stainless steel SS304/316; Carbon steel; Aluminum; Copper & brass; Titanium & nickel alloys; Galvanized steel sheet |
| Surface treatments | Powder coating; Galvanizing; Anodizing (aluminum); PVC coating; Polishing/brushing |
| Hole shapes | Round; Square; Ellipse; Rhombus; Hexagonal; Slotted (long oval) |
| Mesh size (mm) | 0.08–200 |
| Thickness (mm) | 0.2–20 |
| Open area | 10–70% (adjustable) |
| Materials | Stainless steel wire (304); Stainless steel wire (316); Stainless steel wire (316L) |
| Weave types | Plain weave; Twill weave; Dutch weave |
| Mesh count | 1–635 mesh |
| Roll width (m) | 0.5–1.5 |
| Materials | PVC profile with alkali-resistant fiberglass mesh wings |
| Mesh size (mm) | 4×4, 5×5 |
| Surface treatments | PVC coated |
| Colors | White; Orange |
| length m per piece | 2.5 |
| mesh weight g m2 | 160 |
| Materials | Stainless steel wire rope with ferrule-pressed joints |
| Materials | Stainless steel 304L; 316L; 904L |
| Weave types | Plain weave; Twill weave; Dutch weave |
| Shapes | Square; Round; Rectangle; Oval |
| Thickness (mm) | 1–5, customizable |
| Filtration rating (µm) | 0.5–200 |
| Mesh count | 80–635 mesh (Dutch weave can go finer) |
| Product forms | Filter discs, filter cylinders, mesh roll stock |
| Materials | SS304; SS316; Spring wire; Music wire |
| Wire diameter (mm) | 0.8–3.0 |
| Weave types | Balanced weave; Double balanced weave; Conventional (chain link) weave; Compound balanced weave (cordweave); Flat wire belting; Flat-flexing belting; Chain drive belting |
| Materials | Stainless steel; Copper; Aluminum; Monel; Titanium; Nickel; PP |
| Wire diameter (mm) | 0.1–0.3 (compressed gasket typ. 0.11–0.13) |
| Weave types | Single wire; Double wire; Multi wire knitted |
| Materials | Carbon steel (hot-dip galvanized); Stainless steel 304/316; Aluminum |
| Surface treatments | Hot-dip galvanized (30+ year corrosion protection) |
| Grating types | Welded; Press-locked; Riveted; Swage-locked |
| Flat bar (mm) | 20×3 to 100×10 |
| Cross bar spacing (mm) | 50 / 100 |
| Surface finish | Flat (smooth) or serrated anti-slip |
| Materials | Steel wire |
| Mesh size (mm) | 60×80, 80×100, 100×120, 120×150 |
| Surface treatments | Galvanized wire; Galfan wire; PVC coated wire |
| Mesh wire (mm) | 2.0, 2.4, 2.7, 3.2, 3.4, 4.0 |
| Selvedge wire (mm) | 2.4, 2.7, 3.0, 3.4, 4.0 |
| Lacing wire (mm) | 2.0, 2.2, 2.5 |
| Gabion size (m) | 1×1×1, 1×1×0.5, 2×1×1, 3×1×1, 4×1×1, 2×1×0.3 |
| Zinc coating | Hot-dip galvanized ≥245 g/m² |
| Structure | Hexagonal double-twist weave |
| Materials | Low-carbon steel wire (Q195, SAE1008, Q235) |
| Wire diameter (mm) | 0.3–5.0 (bind wire 0.8–1.0; PVC coated core 0.8–2.0, coated OD 1.2–3.0) |
| Surface treatments | Hot-dip galvanized; Electro-galvanized; PVC/PE coated; Black annealed |
| Sub-types | Galvanized Wire; PVC Coated Wire; Black Annealed Wire; Bind Wire |
What Is Not Published, and Why
A missing number is more useful than an unverified one. These fields exist in the catalog but are withheld, each for a stated reason. Asking for them against a drawing is the right way to get them.
| Product | Field | Why it is not published |
|---|
| Double Wire Fence | Panel height (mm) | Two source records disagree and the discrepancy is unresolved, so no figure is published. Confirmed per project against an approved drawing. |
| 3D Curved Fence | Panel height (m) | Two source records disagree and the discrepancy is unresolved, so no figure is published. Confirmed per project against an approved drawing. |
| 358 Anti-Climb High Security Fence | Aperture and wire diameter | A figure previously shown could not be traced to a verified JoyLink specification and was withdrawn. Both are confirmed per project against an approved drawing before quotation. |
Two things are also absent from every table above because they are not properties of a product. Minimum order quantity and lead time depend on the specification, the surface treatment and the quantity, so no general figure is published for either. And no entry here carries a certified security or service-life rating: JoyLink does not hold ISO 9001, SGS, CE or UL certification, and says so on the quality page.
How to Request a Quotation
Send the specification through the quote form, or reach the factory directly from the contact page. A quotation can be priced rather than estimated once it carries the material, the wire diameter, the mesh opening, the finished dimensions, the surface treatment system with its RAL color, the post and accessory list, the quantity, and the incoterm with destination port. The fields a fence panel quotation needs are set out in this checklist.
